MAINTENANCE

What about maintenance or wearing parts?

2019-09-04T11:41:22+00:00

Designed with high quality components, the HT-200 requires very little maintenance. With a lifespan of about 20 years, it was created to save you time, not lose it!

What about maintenance or wearing parts?2019-09-04T11:41:22+00:00

If I have several HT-200 units, should I start each one separately?

2019-09-04T11:32:03+00:00

No, you do not have to start each one separately, each HT-200 controller comes with a "bus communication mode", optionally you can choose to install an HMI (operator screen) that connects all HT-200 and one-touch start all of HT-200. As a result, you will only have to program the temperature recipe and desired cycle time. It is also possible to program specific cooking zones. For example: oven inlet zone 1/100F and zone 2/130F and zone 3/150F, etc.

If I have several HT-200 units, should I start each one separately?2019-09-04T11:32:03+00:00

How long have Sun-Spot products been available?

2019-09-04T11:28:59+00:00

The transmitters we use have been available for 35 years. Following the request of several paint manufacturers, we have been selling Sun-Spot products for 6 years now. We invented, designed and developed the HT-200 from our extensive expertise.

How long have Sun-Spot products been available?2019-09-04T11:28:59+00:00

What is the lifespan of the transmitter?

2019-09-04T11:27:08+00:00

The lifespan of the transmitter is between 15 and 20 years. After that, you can refurbish the unit at a cost of $ 1,800 CAD per refurbished transmitter.

What is the lifespan of the transmitter?2019-09-04T11:27:08+00:00
Go to Top