Do you have a team in Europe?
sunspotwp2019-09-04T11:50:37+00:00Yes, we do have a team in Europe. Our European team is at your disposal in case of problems, or any other requests. We offer support at your location!
Is the HT-200 environmentally friendly?
sunspotwp2019-09-04T11:43:40+00:00Yes, the HT-200 is environmentally friendly. Approved by the "Green Business", the impact on the environment is minimal and controlled. HT-200 vaporizes the solvents contained in the coatings as H2O. It does not produce combustion. Catalysis is an oxidation of gas, therefore there are no emissions of greenhouse gases!
Is the HT-200 a safe device?
sunspotwp2019-09-04T11:43:19+00:00Without flame release, it does not generate a direct heat like a lamp, so there is no risk of fire or explosion. The temperature of the substrate is controlled by a pyrometric camera installed in the heating head. The data is sent to the controller which automatically regulates the temperature, ensuring a perfect finish.
Can you set the heating temperature and its duration?
sunspotwp2019-09-04T11:42:49+00:00Yes, you can fully control the HT-200 through its control unit. With a backlit LCD screen, you can program the heating time and temperature, activate or deactivate a heating head, and activate or deactivate the pyrometers.
At a high drying speed, will the varnish or paint be un-cooked and alter the finish?
sunspotwp2019-09-04T11:41:49+00:00No, at a high drying speed the varnish/paint will not be uncooked and alter the finish. There are no issues of an oven being too hot, which cooks the coating with micro bubble formation on the surface. Additionally, there are no problems with impurities that contaminate the treated surface. The HT-200 dries in about ten minutes on average, while free air can take about ten hours to dry.
What about maintenance or wearing parts?
sunspotwp2019-09-04T11:41:22+00:00Designed with high quality components, the HT-200 requires very little maintenance. With a lifespan of about 20 years, it was created to save you time, not lose it!
Can I install it by myself?
sunspotwp2019-09-04T11:40:54+00:00The HT-200 has been developed to be "plug and play". Installing it is very easy and requires very few tools!
Can the HT-200 be installed in a workshop without difficulty?
sunspotwp2019-09-04T11:40:24+00:00The HT-200 is designed to fit in any factory or workshop environment. Thanks to its articulated arms, the HT-200 can very easily reduce its size. Fixed on a wall, in a paint booth or even on the ceiling, you will save floor space while enjoying its incredible efficiency!
Does the HT-200 work in all kinds of directions and positions?
sunspotwp2019-09-04T11:40:00+00:00Yes, the HT-200 works in all directions and positions. It works upwards, sideways, towards the wall, down. There is no restriction on how to use it.
Do you have financing opportunities?
sunspotwp2019-09-04T11:39:34+00:00Yes, we do have financing opportunities. We offer financing through leasing or lease purchase at very competitive rates.