Yes indeed, the HT-200 is like a spotlight. If it is in a space where it is dark, you simply have to imagine that one illuminates a flashlight, allowing for a clear source of light. Imagine 2, 3 or 4 units and you will understand that together they will illuminate all surfaces after being reflected. Walls, ceilings, floors, roofs, etc. will be illuminated. As a result, dark spaces are seen more clearly.
The HT-200 emits a direct uniform heat that radiates about 30 degrees (funnel type) all around the transmitter. Think of a flashlight that is pointed at the wall, the beam will be concentrated and dissipate around as we move away from it. It is desirable to install the correct number of units based on 4 feet of radiation between each product to be cooked. As a result, you will minimize the number of units required for your specific needs.
It is important to remember that the HT-200 is a cooking unit, therefore it will be hot, although it is not hot enough to inflict burns.
No, the HT-200 is not dangerous for humans. There are no dangerous gas emissions and the wavelength of 2-10 microns is below the microwave and above the ultraviolet waves, making it perfectly safe.
No, you do not need to exhaust the “exhaust air” of the HT-200. It is approved "non-vented" by the CSA.
The wavelength of 2 to 10 microns emitted by the HT-200 is absorbed by the paint. As a result, the paint emits hot air and then the warm air rises to the roof of the enclosure oven. The hot air is then captured and passed through a fan that redistributes it in the furnace providing free energy that is then recovered. The infrared and hot air mix offers the best of both worlds, plus it vents a little hot air outside the building according to CSA B149.15.
Yes, we do supply enclosure cooking tunnels with the HT-200. If the customer wishes and/or provides the plans and technical specifications of the fans. The customer then builds it by him/herself under our supervision. In addition, we offer our customers three "standard enclosure" models. They are all very easy to modify when it comes to the specific needs of your installation.
Yes, the HT-200 can work in an open space. It works very well in open spaces and is not affected by the air and temperature currents present in the workplace.
When a solvent comes into contact with a Sun-Spot HT-200 unit, the gases produced are transformed into H2O (water). This lowers the volume of harmful gases released into the atmosphere.
No, the HT-200 do not emit flue gases like CO and are Green products (certified by Green business). They produce no gases such as NOX (nitrogen oxide), CO, etc. HT-200 is a catalytic product that creates gas oxidation and not combustion as a chemical reaction.
